How to choose a mobile robot LiDAR
Portée, FoV et résolution
Size range for stopping distance and FoV for blind spots; resolution must cover the smallest critical obstacle.
Environnement et intégration
Check IP rating, temperature, weight, power draw and the availability of a maintained ROS 2 driver.
Compatible LiDAR sensors
12 catalog products match these criteria.
RPLIDAR A3
25 m · ROS driver (open source)
SlamtecRPLIDAR A1
12 m · ROS driver (open source)
RoboSenseE1
30 m @10% · RoboSense SDK
HesaiFTX 140
20 m @10% · Vendor SDK
RoboSenseHelios
120 m · RoboSense SDK
HesaiJT128
40 m @10% (60 m max) · Vendor drivers
LivoxMid-360
40 m typ. (100 m max) · Livox SDK and ROS drivers
BenewakeTFmini
12 m · ROS driver
Pepperl+FuchsR2000
Up to 30 m · ROS driver available
HesaiXT32
120 m @10% (200 m max) · Vendor drivers
SICKpicoScan150
65 m · sick_scan_xd (ROS 2)
HokuyoUST-20LX
20 m · Hokuyo ROS driver
Related guides and articles
Elegir un LiDAR para un robot móvil
A practical method to connect robot scenario, field of view, useful range, latency and software integration before choosing a sensor.
Lista de verificación de integración LiDAR antes del prototipo
A structured checklist to secure the mechanical, electrical, software and field integration of a LiDAR sensor.
Las familias de LiDAR: mechanical spinning, estado sólido, semisólido, FMCW y hemisférico
Una guía técnica completa de las diferentes arquitecturas LiDAR — del spinning mecánico al FMCW — con sus principios de funcionamiento, ventajas, limitaciones y una tabla comparativa.
Integrar un LiDAR en ROS2: guía completa
Guía paso a paso para integrar un LiDAR Ouster, Hesai, Livox o SICK en ROS2 (Humble/Iron/Jazzy): instalación de controladores, configuración de red, PTP, QoS, lanzamiento, visualización RViz2, SLAM y fusión de sensores.
FAQ LiDAR: 20 preguntas/respuestas para entenderlo todo
Todo lo que necesita saber sobre el LiDAR en 20 preguntas técnicas: alcance, FoV, estado sólido vs mecánico, FMCW, ROS, SLAM, precio, precisión, seguridad ocular y más.
Comprender los datos del LiDAR: nube de puntos, formatos y ROS
Nubes de puntos, intensidad, reflexiones múltiples, formatos PCD/LAS/ROSbag: todo lo que hay que saber para explotar los datos brutos de un sensor LiDAR.
FAQ
What LiDAR range should an AMR use?
Useful range should exceed maximum stopping distance with margin for low-reflectivity targets. Indoors, 20 to 50 meters is often sufficient depending on speed.
Does a mobile robot need 2D or 3D LiDAR?
2D works well in flat, controlled environments. 3D better detects ramps, overhanging objects and complex geometry, but needs more bandwidth and compute.
Is ROS 2 support essential?
It is strongly recommended when the robotics stack uses ROS 2. A maintained driver reduces integration time and improves confidence in updates, timestamps and point formats.