How to choose a mobile robot LiDAR
Portée, FoV et résolution
Size range for stopping distance and FoV for blind spots; resolution must cover the smallest critical obstacle.
Environnement et intégration
Check IP rating, temperature, weight, power draw and the availability of a maintained ROS 2 driver.
Compatible LiDAR sensors
12 catalog products match these criteria.
RPLIDAR A3
25 m · ROS driver (open source)
SlamtecRPLIDAR A1
12 m · ROS driver (open source)
RoboSenseE1
30 m @10% · RoboSense SDK
HesaiFTX 140
20 m @10% · Vendor SDK
RoboSenseHelios
120 m · RoboSense SDK
HesaiJT128
40 m @10% (60 m max) · Vendor drivers
LivoxMid-360
40 m typ. (100 m max) · Livox SDK and ROS drivers
BenewakeTFmini
12 m · ROS driver
Pepperl+FuchsR2000
Up to 30 m · ROS driver available
HesaiXT32
120 m @10% (200 m max) · Vendor drivers
SICKpicoScan150
65 m · sick_scan_xd (ROS 2)
HokuyoUST-20LX
20 m · Hokuyo ROS driver
Related guides and articles
Choisir un LiDAR pour un robot mobile
A practical method to connect robot scenario, field of view, useful range, latency and software integration before choosing a sensor.
Checklist d'intégration LiDAR avant prototype
A structured checklist to secure the mechanical, electrical, software and field integration of a LiDAR sensor.
Les familles de LiDAR : mechanical spinning, solid-state, semi-solid-state, FMCW et hemispherical
Un guide technique complet des différentes architectures LiDAR — du spinning mécanique au FMCW — avec leurs principes de fonctionnement, avantages, limites et un tableau comparatif.
Intégrer un LiDAR dans ROS2 : guide complet
Guide pas à pas pour intégrer un LiDAR Ouster, Hesai, Livox ou SICK dans ROS2 (Humble/Iron/Jazzy) : installation des drivers, configuration réseau, PTP, QoS, lancement, visualisation RViz2, SLAM et fusion de capteurs.
FAQ LiDAR : 20 questions/réponses pour tout comprendre
Tout ce que vous devez savoir sur le LiDAR en 20 questions techniques : portée, FoV, solid-state vs mécanique, FMCW, ROS, SLAM, prix, précision, sécurité oculaire et plus.
Comprendre les données issues du LiDAR : nuage de points, formats et ROS
Nuages de points, intensité, réflexions multiples, formats PCD/LAS/ROSbag — tout ce qu'il faut savoir pour exploiter les données brutes d'un capteur LiDAR.
FAQ
What LiDAR range should an AMR use?
Useful range should exceed maximum stopping distance with margin for low-reflectivity targets. Indoors, 20 to 50 meters is often sufficient depending on speed.
Does a mobile robot need 2D or 3D LiDAR?
2D works well in flat, controlled environments. 3D better detects ramps, overhanging objects and complex geometry, but needs more bandwidth and compute.
Is ROS 2 support essential?
It is strongly recommended when the robotics stack uses ROS 2. A maintained driver reduces integration time and improves confidence in updates, timestamps and point formats.